Trapeze Bar
$70.00
(3)

 23" Steel trapeze bar 
Mater black powder coating 
1" hollow steel bar
Laser cut ¼” steel tabs welded flat on each side for maximum strength.



 

Beam Clamp
$84.00
(2)

Our Beam Clamps are reliable and rugged, made of an all steel construction and ready for all aerial rigging.

Maximum Flange Width 8.25 inches

2Ton WLL

**We recommend using XL Carabiners due to the thickness of the Beam Clamp attachment point**

 

 

New
Triangle Spreader Plate
$20.00
(2)

¼” steel rigging plate
Three ½” holes for carabiner attachment 
Matte black powder coating
Made for straps, aerial net, hammock, trapeze, and any dual point apparatus rigged from a single point.

 

Rigging Plate
$50.00
(4)

This Stainless steel rigging plate is designed for attaching to wood beams. They are made from ¼ inch stainless steel and have a 1.75" hole at the bottom for easy rigging.

Tested for over 5,000lbs of weight bearing pressure, these plates are strong and sturdy.

Straightforward and very easy to rig, if you’ve got big wood beams – these are the plates for you.

You attach this plate with .5" bolts and your rig points will be safe and secure in no time. Overall height of 10.5" and 3.25" wide.

Rigging Rope
$100.00
(2)

This is 11mm Static Kernmantle Rigging Rope. Perfect fit for our aerial pulleys and ready to support any aerial artist during the show. This rope is rated for over 7300lbs (33.3 kN).

Strength rating over 7,300lbs (33.3 kN).
Material: Polyester / Nylon Core Weight per meter: 90 g/m.
Elongation: 2.2% at 1.35kn (300lbs) - 4.4% at 2.7kn (600 lbs) - 7.4% at 4.4kn (1000lbs).

New
Half Shackle Swivel
$65.00
(2)

Introducing our newly designed aerial swivel, with half shackle feature. These are great for minimizing hardware needed for your rigging set up and/or a great option for an aerial straps set up without losing too much vertical height with additional hardware.

These half shackle swivels come with an allen key for opening/closing and 3 washers/spacers.

Hammock Anchor
$29.00
(4)

Ensure a secure rigging setup for your aerial yoga hammock with our diamond shaped Hammock Anchors.   

Tested to withstand forces exceeding 4000lbs, these plates come with four recommended screws for easy installation into structural wood beams. Perfect for home studios, these anchors are not recommended for vaulted ceilings and are intended for use with aerial yoga hammocks only.  

Hammock Ring
$10.00
(3)

Enhance your hammock rigging with our Hammock Rings - safe, easy, and essential for aerial hammock setups.   

Crafted from stainless steel, rated for 23Kn.   

Use two rings per hammock for optimal stability. Ideal for aerial yoga and performance-based fabric sling setups.  

New
Harness Lines
$20.00
(0)

These 5ft steel cables are ideal for aerial dance suspended from a spreader bar. They have a black vinyl covering so they are easy to touch and disappear on most backgrounds.

Sold in a set of two.

Aerial Swivel
$45.00
(5)

Swivels allow your apparatus to spin without twisting lines or knotting up your lines. Our strong and versatile aerial swivels are made to give your act the movement and freedom you desire. Made from high density aircraft aluminum they are reliable and strong. Start spinning and enjoying the freedom to dance in the air.

Check out our Half Shackle Swivels by CLICKING HERE

Trapeze Spreader Bar
$75.00
(2)

Made from 1” steel 
Four carabiner attachments on ¼” welded tabs 
Matte black powder coating
27” end to end

New
Spreader Bar
$95.00
(2)

Our spreader bars are perfect for aerial wire work performance.

The spreader bars are 38" in total length, and approximately 10" in total vertical height (from tab at top to bottom tabs).

You can choose to order only the spreader bar, or a set that comes with the spreader bar, 5ft cables with a black vinyl covering, and two 3/8" black coated steel screwpin shackles.

 

 

 

 

 

 

Hot
Pole Wrap
$20.00
(6)

Pole Wrap can turn any pole into an acrobatic pole! Quick and easy to install and take down at the end of your training, Pole Wrap can take your pole training to the next level by creating a cushioned grip that is better than a bare metal pole.

With many other applications, Pole Wrap can improve your performance on a variety of apparatuses.  These portable, removable rubber wraps are made from synthetic, latex free materials and leave no residue when removed.

  • MINI: 6 inches wide by 12 inches long - great for a pole attachment such as a hand loop
  • SMALL: 6 inches wide by 7 feet long to cover approximately 5 ft of 45mm pole
  • MEDIUM: 6 inches wide by 10.5 feet long to cover approximately 7 ft 6 in of 45mm pole
  • LARGE: 6 inches wide by 14 feet long to cover approximately 9-10 ft of 45mm pole
  • X-Large: 6 inches wide by 21 feet long to cover approximately 15 ft of 45mm pole

Oval Quick Link
$10.00
(2)

The working load limit is rated at 2,300 lbs and with sturdy steel threads, these quick links are extremely robust and reliable pieces.

High quality 3/8" Oval Quick Link. Steel, powder-coated black with screw-gate style opening.

These are the preferred connectors for our specialty Lyra Ladder.

Hot
Hand Loop for Pole
$66.00
(3)

Experience unparalleled comfort and stability with our Hand Loop for Pole! Crafted with soft neoprene cover for a secure grip. Measures 18 inches in total length with a 9-inch neoprene-covered loop. Comes with black cinch straps for added security.
 

Circus Loop
$65.00
(4)

Discover comfort and stability with our Circus Loop! Crafted with soft neoprene cover for a secure grip. Available in Hand, Tension Hand, Foot, and Neck options. Comes with black cinch straps for added security.

HAND Loop - 12 inch (Total length) with a 9-inch usable neoprene covered loop.
FOOT Loop - 15 inch (Total length) with a 12-inch usable neoprene covered loop.
NECK Loop - 18 inch (Total length) with a 15-inch usable neoprene covered loop. Ideal for neck hangs.
TENSION HAND Loop - 18 inch (Total length) with 9-inch usable neoprene covered loop. Perfect for cinching onto poles, lyra, rope, web or other apparatus.

Delta Quick Link
$10.00
(2)

Stainless Steel with Black Powdercoating
High quality 3/8" Black Powdercoated Stainless Steel
WLL: 5kN

New
Floor Plate
$55.00
(2)

This stainless steel floor plate is designed for anchoring to concrete floors for tying off your pulley system.

This plate attaches with .5" bolts. The plate measures 5" x 7" x 1.8" and has three attachment points.

Fly Away Kit
$34.00
(2)

This whole kit can be set up to fly away your aerial apparatus when not in use.

Each Fly Away Kit comes with:

  • Approximately 50ft of 1/4" solid braid nylon fly away rope
  • Stainless steel, 12" wall clete
  • 25mm Stainless steel pulley with combined swivel top
  • Stainless steel connecting clip

Carabiner Keeper
$0.50
(3)

A carabiner keeper is made from 1-2" of high strength nylon tubing. This material will protect your hardware and create a barrier for friction on your equipment.

We recommend using two keepers per carabiner - One for the top, and one for the bottom.